Filter
Top Products
Bucket Full Indicator
When the indicator light comes on, automatic flow
control stops the unit.
Turn the unit off by pressing the POWER key.
Check to see if the bucket is full. If so, empty it.
If bucket is not full and indicator light is on, the
bucket is not in the proper position. Remove and
reinstall it.
Hr
CURRENT
HUMIDITY
SET
HUMIDITY
Check Filter Indicator
The "check filter" indicator will flash when the
filter needs to be cleaned. Remove the filter,
wash it, and put it back in. Press "Filter Reset."
The "check filter" indicator will turn off.
Note: Make sure the filter is dry before replacing.
6
Smart Dry
This setting compares the set humidity level with
the actual humidity level and adjusts the fan
speed automatically.
Signal
The bucket full audible signal can be turned on
and off by pressing the SIGNAL button. The
default setting is set in the ON position. When
the bucket is full, the red BUCKET FULL indicator
light will blink and the alarm will sound 5 times
every 15 minutes.
To turn off the audible signal feature, press the
SIGNAL button once, and the LED display will
show “OF” for 2 seconds. In this setting, when
the bucket is full, the BUCKET FULL indicator light
will blink, but the audible alarm will not sound.
To reactivate the audible signal, press the
SIGNAL button and the LED display to the left
will show “ON” for 2 seconds.
5
Power
2
Current Humidity/Setting Humidity Display
Displays the current humidity level and adjusts the
humidity to a desired level.
Setting Humidity Range: 40%RH~70%RH
Display Humidity Range: (LO)30%RH~(HI)90%RH
9
Current Temp/Timer Set Display
When the dehumidifier is runningit displays the
current temperature.Press the timer key to program
the dehumidifier to turn on or off automatically at a
pre-deter mined time.
M M