Haier CWH12A Air Conditioner User Manual


 
F
E
A
B
C
D
G
H
I
J
9
Attach Side Curtains to Window
1. Pull the left-hand curtain out until it fits into the window
channel.
2. Use ¹⁄₈" drill bit to drill a starter hole through the hole in the
side curtain and window sash.
3. Insert one of the ³⁄" screws through the left-hand curtain and
into the window sash.
4. Repeat for the right-hand curtain.
Window Sash View
5. Use ¹⁄₈" drill bit to drill a starter hole through the hole in the
shutter clamp and windowsill.
6. Insert one of the ³⁄" screws through the hole in the side
curtain clamp and into the windowsill.
7. Repeat for right-hand curtain.
Windowsill View
Complete Window Installation
Insert foam seal behind the top of the lower window sash and
against the glass of the upper window.
A.Window sash
B.Hole in side curtain
C.
³⁄
" screw
A
B
C
A.Side curtain
B.
³⁄
" screw
C.Side curtain clamp
A.Top of lower window sash
B.Foam seal
A
B
C
A
B
2. Assemble sill angle bracket to support brackets at
the marked position as shown. Hand tighten,
but allow for any changes later.
3. Install support brackets (with sill angle brackets
attached) to correct hole in bottom of cabinet as
shown.
5. Check to make sure that the cabinet is slanted
slightly downward on the outside. If necessary,
re-adjust support bracket.
A
4. Tighten all 6 bolts securely.
A.½" Screws
A” Screws
B.Washers
C.Lock Washers
D.1/5” Nuts
E.Right Supoort Brackets
F.Right Supoort Brackets
G.Angle Brackets
H.Washer
I.Lock Washer
J.1/4" Nuts