Filter
Top Products
Operation
SMART
Every time the button is
pressed, temp. setting
o
C.
Every time the button is
pressed, temp. setting
o
C.
Unit will start running to reach
the temp.setting on LCD.
1
2
Press FAN SPEED button. For each press, fan speed
changes as follows:
Unit will run at selected fan speed.
AM
Select TEMP.setting FAN Operation
Press TEMP.setting
Press TEMP button.
air flow horizontally will be
much more helpful for a
When humidity is high,condensate water might occur at
air outlet if all vertical louvers are adjusted to left or right.
It is advisable not to keep horizontal flap at downward
position for a long time in COOLor DRY mode ,
SWING Operation
SMART
1
2
AM
Up and down air flow direction
Left and right air flow direction
For each press of “ ” button,
air flow direction on remote
controller displays as follows
according to different operation
modes:
COOL/DRY:
HEAT:
SMART:
Initial state
remote controller:
Initial state
For each press of “ ” buttor,remote controller
displays as follows:
As cold air flows downward in COOL mode, adjusting
otherwise, condensate water might occur.
better air circulation.
increases 0.5
decreases 0.5
FAN Operation
LOW
MED HI
AUTO
4