Haier 0010518358 Air Conditioner User Manual


 
A
B
A
4. Adjust the temperature between 61ºF and 86ºF (16ºC and
30ºC).
NOTE: In Fan mode, the temperature cannot be set.
5. Wait 3 seconds before turning off the air conditioner.
6. Press TIMER. Timer On indicator light on the air conditioner
control panel will ash. Display will show remaining hours
before the air conditioner will turn on.
7. Press the TEMP/TIME up or down arrow button to change
the delay time from 1 hour to 24 hours.
8. After 5 seconds, Timer On indicator light on the air
conditioner control panel will remain on. Display will show the
current room temperature.
To clear Timer delay program:
NOTE: Air conditioner can be either on or off.
1. Press TIMER once after it has been programmed. Display on
the air conditioner control panel will show remaining time.
2. While the display is showing the remaining time, press
TIMER again. Timer Off indicator light will turn on.
To see or change the remaining time (in hours):
1. Press TIMER once after it has been programmed. Display on
the air conditioner control panel will show remaining time.
2. While the display is showing the remaining time, press
the TEMP/TIME up or down arrow button to increase or
decrease the time.
3. After 5 seconds, the display on the air conditioner control
panel will show the current room temperature.
Your new air conditioner is designed to give you many years of
dependable service. This section tells you how to clean and care
for your air conditioner properly.
The air lter is removable for easy cleaning. A clean lter helps
remove dust, lint, and other particles from the air and is
important for best cooling and operating efciency. Check the
lter every 2 weeks to see whether it needs cleaning.
NOTE: Do not operate the air conditioner without the lter in
place.
1. Turn off the air conditioner.
2. Remove the air lter by opening the front panel and removing
the air lter.
When your air conditioner is operating normally, you may hear
sounds such as:
Droplets of water hitting the condenser, causing a pinging or
clicking sound. The water droplets help cool the condenser.
Air movement from the fan.
Clicks from the thermostat cycle.
Vibrations or noise due to poor wall or window construction.
A high-pitched hum or pulsating noise caused by the modern
high-efciency compressor cycling on and off.
Normal Sounds
Cleaning the Air Filter
AIR CONDITIONER CARE
A. Air lter
B. Front panel
A. 2-Way Air Flow
12 13
Changing Air Direction
2-Way Air Flow:The air directional louvers let you control the
direction of the airow to the desired direction.The airow can be
directed left-right.