Filter
Top Products
Then select COOL operation.
When the COOL display lights bright,the unit will
be working under the COOL function.
Saving energy function only can be used
when A/C working on cooling condition.
FAN SPEED
When this function is selected, the fan will
shut off three minutes after the compressor
cycles off. This will reduce energy consumption
and noise. When the compressor turns back on,
the fan will turn on at the same time. If this
function is not selected, the fan will not shut
off when the compressor cycles off.
ENERGY SAVER operation
ENERGY SAVER selection
E-S
4
4
FAN SPEED
Press MODE button. For each press, operation mode
changes as follows: FAN COOL DEHUM
2. Select operation mode
1. Start
Press POWER button.
4. Stop
Press POWER button again.
3
7