Filter
Top Products
TIME ZONE: 6
0-12
↑
Daylight Savings
OmniLT automatically calculates the day of daylight savings time each year. It also adjusts the "time of day" each time daylight
savings time begins and ends.
To enable the system to properly calculate daylight savings time, a start month, start weekend, end month, and end weekend is
set-up at the factory. You may change or disable this function if desired.
DST START MONTH: 4
1-12 0=DISABLE
DST START WEEKEND:
FIRST SUNDAY #=CHNG
DST END MONTH: 10
1-12 0=DISABLE
DST END WEEKEND:
LAST SUNDAY #=CHNG
↑
Set the value for DST Start and End Months to "0" if Daylight Savings Time does not apply to your region, or to disable this
automatic time update feature.
The DST Start and End Weekend takes place on the specified Sunday (1-7) at 2:00 AM.
To change the DST Start or End Weekend, press the ' # ' key, then use the arrow keys to scroll through the list. Press the ' # ' key
to make the new selection
.
NUMBER DESCRIPTION
1 First Sunday
2 Second Sunday
3 Third Sunday
4 Fourth Sunday
5 Last Sunday
6 Next to Last Sunday
7 Third from Last Sunday
Set Up Names
The system can be set up to display descriptive names such as "FRONT DOOR", "JOHN'S BEDROOM", or "PORCH LIGHT"
for zones, units, buttons, codes, temperatures, and messages. These names are displayed instead of the zone, unit, button, code,
temperature, or message number that is normally displayed. Zone and Message names may be up to 15 characters long. Each of
the other names may be up to 12 characters long.
To enter the Set Up Names menu, from the Setup menu, press the 7 (NAME) key.
SET UP NAME
1=CTRL 2=ZONE 3=BTTN
↓
4=CODE 5=TEMP 8=MSG
↑
Select the item that you would like to name by pressing one of the keys. The current name for the first item (unit, zone, button,
code, temperature, or message) is then displayed. Use the arrow keys to scroll through the list of names.
66