Filter
Top Products
8
PROGRAMMING
Your thermostat may be programmed to adjust the heating and cooling
settings up to 4 times per day (MORN, DAY, EVE, and NITE). You
can setup a temperature time schedule for weekdays, Saturday, and
Sunday.
To enter programming mode, press the Prog key 4 times.
When in programming mode:
1. The item that is being programmed will flash.
2. The up arrow key (∧) is used to increase the value.
3. The down arrow key (∨) is used to decrease the value.
4. The Prog (>) key is used to advance to the next item.
5. The Hold (<) key is used to return to the previous item.
6. To exit programming mode, press the Mode key.
The thermostat will automatically exit programming mode after 20
seconds of no key activity.
When programming a time for the Morning, Day, Evening, or Night
period, the time will be increased or decreased in 15-minute
increments. If the up arrow is pressed at 11:45 PM, or the down arrow
is pressed at 12:00 AM, the time display will be blank, indicating that
no scheduled temperature changes will be made for that period.
Your thermostat will follow a set of time scheduled programs on
weekdays (Monday-Friday), on Saturday, and on Sunday. This will
allow you to have different heating and cooling settings on Saturday
and Sunday, than you normally would have for weekdays (Monday -
Friday). When programming the time schedules, the weekday time
schedule is programmed first. The Saturday time schedule is
programmed second, and the Sunday time schedule is programmed
last.