Haan SI-3b Carpet Cleaner User Manual


 
Before Using Your Steam Cleaner
Be sure to read ALL instructions and warnings before using
your steam cleaner.
Helpful Hint:
To extend the life of your
Ultra-Microfiber Pads,
always place your unit on
the floor protector/resting
mat while the unit heats
up. Attach the Ultra-Micro-
fiber Pad when the unit is
ready to use.
Helpful Hint: Helpful Hint:
When heated, never leave the ap-
pliance in one spot on any surface
for any period of time. Always
place your steam cleaner on the
Floor Protector/Resting Mat when
stationary.
Always empty water from water
tank after use. To ensure opti-
mum product function use Fresh
Rinse
once a month.
Helpful Hint:
When using the steam
cleaner with the Carpet
Glide it will not lift all set-in
stains from your carpet.
Our patented Ultra-Mi-
crofiber Pad may be used
to act as a “blotter” for
removing most fresh, wet
spills and stains.
Your steam cleanr is designed to clean hard floor surfaces that will withstand high
heat. Do not use on unsealed wood or unglazed ceramic floors. On surfaces that
have been treated with wax or some no-wax floors, the sheen may be removed by
the heat and steam action. It is always recommended to test an isolated area of the
surface to be cleaned before proceeding. We also recommend that you check the
use and care instructions from the floor manufacturer.
WARNING
1. Handle
2. Pole
3. Power Indicator Light
4. Steam Power Switch
5. Storage Hook (rotates 360º)
6. Power Cord Organizer (bottom)
7. Power Cord
8. Water Tank Release Button
9. Detachable Water Tank
10. Fresh Rinse Lime & Scale Remover
11. Floor Protector / Resting Mat
12. Carpet Glide
13. Ultra-Microfiber Pads (x4)