Filter
Top Products
6
Before Using Your Handheld Cleaner
Be sure to read ALL instructions and warnings before using
your Handheld Cleaner.
After plugging in the power cord and beginning to heat, a fixed amount of water is
released due to the build-up of internal pressure. After heating is complete, spray
the steam 2 to 3 times before affixing or switching any additional attachment.
Using Your Handheld Cleaner - Operating Instructions
LOCK
UNLOCK
1
1
2
Push down on the Pressure
Locking Safety Cap until the
cap “clicks”. While cap is
pressed, turn counterclock-
wise to remove.
LOCK
UNLOCK
2
Remove Pressure Locking
Safety Cap. The Continuous
Steam Lock should be in the
“Unlocked” position.
3
Fill the Measuring Cup with
200ml of water and pour into
the water tank.
LOCK
UNLOCK
CAUTION
CAUTION
CAUTION
CAUTION
Use a grounded receptacle. Use only a heavy duty extension cord rated for 15 amps
minimum – DO NOT use an ordinary extension cord. To provide continued protec-
tion against the risk of electric shock, connect to properly grounded outlet only.
After use, pressure will exist within the product. Press the Control Trigger to elimi-
nate this pressure prior to opening the Pressure Locking Safety Cap.
The handheld cleaner is designed to clean hard surfaces and upholstery that will
withstand high heat. DO NOT use on soft plastic and cold glass. On surfaces that
have been treated with wax, or on some no-wax floors, the sheen may be removed
by the heat and steam action. DO NOT use on unsealed wood. This could cause
the wood panel to rise. It is recommended that an isolated surface area be tested
to verify suitability before proceeding to the rest of the area.