Filter
Top Products
TAB
TAB
7
1 2
10
Tilt handle at a 45º angle. Push
and pull slowly across the floor
to clean thoroughly.
Attach carpet glide by placing
unit under “tabs” and gently
pushing down into place.
With carpet glide attached, place
on Floor Protector / Resting Mat.
Follow operating instructions.
Turn unit to standby mode,
unplug and let cool. Use
foot on “Hands Free” tab to
remove Carpet Glide from
steam head.
When unit has cooled, remove
Ultra-Microfiber pad and
empty the water tank. Store
unit upright in a dry area.
8
When done, push the Steam
Level Power Button to the standby
mode.
9
Place unit with Ultra-Microfi-
ber pad attached onto Floor
Protector / Resting Mat and
unplug the unit. Allow to cool
down for five (5) min.
Using the Carpet Glide
What is the Carpet Glide?
The carpet glide enables the steam cleaner to freshen, deodorize and sanitize carpet-
ing, rugs, upholstery, pet cushions and more. Used with the steam cleaner it kills dust
mites and other allergens on a variety of surfaces.
NOTE: The Carpet Glide is used WITHOUT the Ultra-Microfiber Pad.
3
To Remove
Carpet Glide
IMPORTANT: Vibration Sound
IMPORTANT
During use it’s normal to hear a “clicking” sound coming from
the unit. This sound is produced by the water being pumped
through the unit.
Always empty the water tank once you have finished using your
steam cleaner.
“Hands Free”
Removal Tab