GSW Electric Water Heater P/N 61515 REV. G (05-03) Water Heater User Manual


 
ELECTRIC WATER HEATER
INSTALLATION AND OPERATING INSTRUCTIONS
For Brands: GSW, John Wood, SpaceSaver, GSW Moffat
TABLE OF CONTENTS
I) Introduction . . . . . . . . . . . . . . . . . . . . . .2
II) Safety . . . . . . . . . . . . . . . . . . . . . . . . . .2
III) Installation . . . . . . . . . . . . . . . . . . . . . . .2
IV) Operation . . . . . . . . . . . . . . . . . . . . . . .3
V) Maintenance . . . . . . . . . . . . . . . . . . . . .4
Warranty . . . . . . . . . . . . . . . . . . . . . . . .6
PLEASE RETAIN THESE INSTRUCTIONS IN A
SAFE LOCATION FOR FUTURE REFERENCE
INSTALLATION RECORD
This water heater is protected by a multi-year warranty against
leaks plus a one (1) year warranty on parts.
Record key data here for future reference and prompt service:
Installed By / Purchased From:
Location of Electrical Switch
or Circuit Protector:
Installation Date:
Serial NumberModel Number
Watts
Watts
Watts-Total
Volts
P.S.I.
U.S. Gal.
IF YOU HAVE ANY INSTALLATION, PERFORMANCE OR
OPERATIONAL QUESTIONS PLEASE CALL THE FOL-
LOWING NUMBER, PRIOR TO REMOVING THE WATER
HEATER
(if this is a rental water heater please contact the rental company)
PART NO. 61515 REV. G (05-03)
1-888-GSW-TECH (1-888-479-8324)
Read and understand these instructions
thoroughly before starting
GSW Water Heating is a division of GSW Water Products Inc.
GSW WATER HEATING
599 Hill Street West
Fergus, ON, Canada N1M 2X1
WARNING:
If the information in these instructions is
not followed exactly, a fire or explosion
may result causing property damage, per-
sonal injury or death.
WARNING:
Improper installation, adjustment, alter-
ation, service, or maintenance can cause
injury or property damage. Refer to this
manual. For assistance or additional infor-
mation, consult a qualified installer, serv-
ice agency, or the electric utility.
FOR YOUR SAFETY
Do not store or use gasoline or other
flammable vapors and liquids in the
vicinity of this or any other appliance.
Installation and service must be per-
formed by a qualified installer, service
agency or the electric utility.