Filter
Top Products
13
Deluxe Vane Axial Heater
Plenum Thermostat
Mounting
The plenum thermostat is the 4 x 4
white box with knob that is
preconnected to heater when heater
is ordered with thermostat.
1. 24" to the right side of the
transition, drill one
3
/
8
" hole
(high temp) or 1
1
/
2
" hole (low
temp) in the center of the ple-
num in a valley (4.00" corru-
gation) or hill (2.66" corruga-
tion) on bin sidewall.
2. Insert the probe through the
hole.
3. Position the housing so that the
tabs are vertical, and the cord
exits the housing horizontally.
Plenum thermostat mounting on bin wall.
5. Caulk between the housing and the sidewall to seal.
4. Use 4 self drilling screws to mount the housing to the bin sidewall.
INSTALLATION
IMPORTANT!
DO NOT EXCEED
PLENUM
TEMPERATURES
LISTED IN TABLE
THIS TABLE IS NOT INTENDED AS A DRYING GUIDE.
IT SHOULD BE USED AS A REFERENCE FOR SETTING MAXIMUM PLENUM
TEMPERATURE FOR SAFE OPERATION.
PMET-OL
HCTAB
-HGIH
PMET
YRDHCTAB
GNIRRITSON
-HGIH
PMET
HTIW
GNIRRITS
SUOUNITNOC
WOLF
)GNITALUCRICER(
NROC
02-5
0
EVOBA
TNEIBMA
PMET
021
0
041
0
061
0
ECIR
01-5
0
EVOBA
TNEIBMA
PMET
001
0
001
0
TON
DEDNEMMOCER
SNAEB
&
TAEHW
02-5
0
EVOBA
TNEIBMA
PMET
011
0
021
0
TON
DEDNEMMOCER
Operating Temperature Table