Filter
Top Products
20
Deluxe Vane Axial Heater
Adjusting the vaporizer coil on a liquid propane model. The top photo
shows the setting in, and the bottom photo shows the coil out.
Adjusting the
Vaporizor
1. Vaporizer should be adjusted
so the vapor pipetrain runs
warm to the touch (100°-
120°F).
2. Loosen 5/16" bolt on adjust-
ment bracket.
3. Swivel vaporizer away from
flame if running too hot,
closer to flame if too cold.
4. Move vaporizer only 1" at a
time and allow a few minutes
for temperature to equalize.
5. Tighten 5/16" bolt and watch
heater run for several minutes
to verify adjustment.
HEATER OPERATION