Filter
Top Products
-14-
Operating the G5955 Hanging Air Filter is straight
forward. Simply connect the unit to power and
push the start switch to “No Remote Control.” The
fan should start up and begin filtering the air in
the room. If it does not start, turn the switch off
and disconnect the power.
• Check the breaker/reset switch located next
to the start switch and reset if needed.
• Check to make sure the outlet connected to
the filter is in working condition. Reset the
breaker or replace the fuse if needed.
• If you are using a remote control system with
this unit, review the installation proceedures
on
page 9.
If the air filter continues to have problems, please
call our customer support lines for troubleshoot-
ing information.
Operations
Operations that generate
large amounts of any
kind of dust may warrant
the use of a respirator
even though the air filter
is running. The hanging
air filter is not a substi-
tute for a respirator!
Operating this equipment creates the
potential for flying debris to cause eye
injury. Always wear safety glasses when
operating equipment. Everyday glasses or
reading glasses only have impact resistant
lenses, they are not safety glasses. Be cer-
tain the safety glasses you wear meet the
appropriate standards of the American
National Standards Institute (ANSI).
G5955 Heavy-Duty Hanging Air Filter
SECTION 5: OPERATIONS