Filter
Top Products
Step 8
Take your electric firebox out of its packaging and position it
between the 2 legs of the mantel. Once you are close to the wall,
plug the firebox into the nearest outlet.
The firebox comes with 3 metal brackets and 20 black screws. These
metal brackets must be attached to both the sides of the firebox and
the mantel to ensure that your firebox does not move around as you
use it. Two of the brackets have 2 large holes on one side. These
large holes line up with 2 screws on the side of the firebox. The other
screws provided must be inserted into the holes at the other end of
the bracket and into the firebox. The other side of each bracket
attaches to the mantel.
The third bracket has no holes on one side. That side should go up
against the firebox but should not be attached as the heater sits right
underneath the bracket. Only the mantel side should be attached.
If you have any questions about the firebox please reference the
installation instructions that come with the unit. Please
reference the Quick Tips section of that instruction manual.
Step 9
You are now ready to position your mantel against the wall.
This step requires 2 people to move the unit.
Anti-tipping device
At this point you must attach the anti-tipping device to your mantel
and your wall. This device is a safety feature that will prevent your
mantel from tipping over if a weight is applied which can unbalance
the unit (like a child climbing onto it).