Greenheck Fan SQ/BSQ Fan User Manual


 
14
Typical Installation
Flexible duct (by others)
3 Wheel
Diameters
3 Wheel
Diameters
PRESSURE LEVEL (Belt Drive Only)
HP - High Pressure Wheel
BSQ - 120 HP - VG/75/A
MODEL CONFIGURATION
BSQ - Belt Drive Inline Exhaust
SQ - Direct Drive Inline Exhaust
FAN SIZE
60 through 420
VG = Vari-Green
®
(Direct Drive only)
MOTOR HP (Belt Drive only)
6 = 1/6 7 = 3/4 30 = 3
4 = 1/4 10 = 1 50 = 5
3 = 1/3 15 = 1
1
2 75 = 7
1
2
5 = 1/2 20 = 2 100 = 10
MOTOR RPM (Direct Drive only)
A = 1725 D = 1550
B = 1140 E = 1050
C = 860 G = 1300
International
(See CAPS for performance)
K = 950 RPM J = 1475 RPM
Models SQ and BSQ ducted inline fans are designed
for the exhaust, supply or recirculation of air in a
building. Typical installation requires ductwork on the
inlet and outlet side of the fan. A minimum of three
duct diameters is required on the inlet and outlet of the
fan to minimize system effect losses. See the diagram
below for a typical installation.
Installations can include flexible duct connections (by
others) on either the inlet or outlet side of the fan or
both. The motor is rigidly mounted and can be oriented
in any direction (top, bottom, side).
The model BSQ ducted inline fan must be installed
with the motor accessible for maintenance and
inspection.
External isolators are recommended, hanging (shown
below) or base mounted.
Installation must meet all local governing codes
and the NEC.
Model Number Code
The model number system is designed to completely identify the fan. The correct code letters must be specified
to designate belt or direct drive. The remainder of the model number is determined by the size and performance
selected from the following pages.