Filter
Top Products
12
474118 •ModelVKERS-MDIOM,Rev.1,April2011 Copyright 2011 © Greenheck Fan Corp.
Greenheck warrants this equipment to be free from defects in material and workmanship for a period of one year from
the shipment date. Any units or parts which prove defective during the warranty period will be replaced at our option
when returned to our factory, transportation prepaid. Motors are warranted by the motor manufacturer for a period of
one year. Should motors furnished by Greenheck prove defective during this period, they should be returned to the
nearest authorized motor service station. Greenheck will not be responsible for any removal or installation costs.
As a result of our commitment to continuous improvement, Greenheck reserves the right to change specifications
without notice.
Greenheck Catalog Vektor ERS-MD provides additional
information describing the equipment, fan performance,
available accessories, and specification data.
®
Phone: (715) 359-6171 • Fax: (715) 355-2399 • E-mail: gfcinfo@greenheck.com • Website: www.greenheck.com
Warranty
AMCA Publication 410-96, Safety Practices for Users and
Installers of Industrial and Commercial Fans, provides
additional safety information. This publication can be
obtained from AMCA International, Inc. at: www.amca.org.
8 ROW COIL
193.8"
EXTERNAL
PIPING BY OTHERS
SERVICE DOOR
155"
INTAKE OPENING
NEMA 3R DISCONNECT
INSPECTION PANEL
1" DRAIN
(PER FAN)
VK-MD-33 (QTY. 2)
ROOF CURB
1.5" DRAIN
BOTH SIDES
.75" DRAIN
LIFT LUG
(QTY. 8)
S
S
S
S
S
S
38"
126.5"
ISOLATION DAMPER
SIDE INLET
Coil Coil
Optional
External
Piping
(by others)
Service Doors
Internal Pipe
Chase
Side or Bottom Intake Opening
Lift
Bracket
Optional
Internal
Piping
(by others)
under
Vektor fans
Bypass
Weatherhood(s)
Vektor bypass
air plenum
optional mounting
locations shown
Filters
Coil
Single and Dual Coil Removal Clearances
Coil Coil
Service Doors
Coil Service
Clearance
Coil Service
Clearance
WEIGHTS (LBS)
CURB 600
FAN (QTY. 2) 4580
FAN BAP 2750
ERS PLENUM 3700
TOTAL 11630
Clearance
Clearance
Used on page 5 of Part #474118 - need to copy, and edit this same drawing for use on backcover of same Instruction.
Used on backcover of Part #474118
Service
Coil Change Out Procedure
Coils can only be pulled out through the side of the
plenum cabinet. Side panels which are nearest to the
coil can be removed if the coil needs to be replaced.
Size 020 ERS plenums only have a single coil and do
not require coil removal clearances on both sides. If
necessary, both coils can be removed through the
same side of the plenum housing. This process would
require the removal of an additional spacer panel that
separates the two coils within the unit.
Cabinet
Size
Minimum Clearance
(inches)
020 114
030 74 (each side)
040 100 (each side)
060 132 (each side)
Date __________________ Time _____________ AM/PM
Notes:___________________________________________
_________________________________________________
_________________________________________________
_________________________________________________
_________________________________________________
Date __________________ Time _____________ AM/PM
Notes:___________________________________________
_________________________________________________
_________________________________________________
_________________________________________________
_________________________________________________
Date __________________ Time _____________ AM/PM
Notes:___________________________________________
_________________________________________________
_________________________________________________
_________________________________________________
_________________________________________________
Date __________________ Time _____________ AM/PM
Notes:___________________________________________
_________________________________________________
_________________________________________________
_________________________________________________
_________________________________________________
Maintenance Log