Filter
Top Products
Installation
6 310863M
Installation
If this equipment is used in a Hydra-Cat
™
or Xtreme
Mix
™
proportioning package, see manual 310794.
F
IG. 2: Feed Pump
1. Install solvent flush kit
a. See FIG. 1. Install pump using mounting
bracket (202) and hardware supplied.
Mount bracket on wall, back of propor-
tioner stand, or cart.
For wall mount, ensure that wall is strong enough to
support weight of equipment, fluid, hoses, and
stress caused during operation. Mount at a conve-
nient height for operation and maintenance, and so
suction hose is not stretched tight. Ensure that
equipment is level.
b. Connect suction hose (207) to elbow
(206) at pump inlet. Place suction tube
in container of solvent.
F
IG. 1: Solvent Flush Kit
TI5675
202
206
207
2. Install feed kits
a. See FIG. 2. Install feed pump (101) in
drum and secure with bung adapter
(BA).
b. Install air control kit (104).
c. Screw swivel union (103) into pump fluid
outlet. Connect hose (102) to swivel.
Connect other end of hose to propor-
tioner.
102
103
101
104
TI5674
BA