Filter
Top Products
Installation
8 309524L
Mounting Heater
Wall Mounting
Bracket 192585
(F
IG. 3)
1. Use M8 bolts of appropriate length and lockwasher
(CC), not supplied, to mount bracket.
2. Install two screws (6) and washers (5) into top 2
heater mounting posts (BB) until they are about 1/8
in. (3 mm) from fully installed.
3. Lift heater and slide two screw heads into bracket
slots. Install remaining 2 screws and tighten all 4.
Bracket 183982
(F
IG. 4)
1. Mount bracket (MM) to heater with screws (6) and
lockwashers (5) supplied.
2. Use M8 bolts of the appropriate length and lock-
washer (NN), not supplied, to secure the bracket to
the wall.
• The heater has a surface temperature of T2
(482°F, 250°C). Follow temperature code
when locating heater. See Technical Data,
page 28, for more temperature code informa-
tion.
• Heater controls must be easily accessible.
• The mounting surface must be able to support
the weight of the heater and fluid, and any
stress caused during operation.
Need wall bracket 192585 or 183982. See Acces-
sories, page 26.
Use wall bracket as a template to mark bolt holes.
Bracket depth provides required solid object
clearance to comply with European flame proof
standards.
F
IG. 3: Bracket 192585
F
IG. 4: Bracket 183982
05442
6 in.
152.4 mm
5 in.
127 mm
6
5
CC
BB
YY
8631A
6 in.
152.4 mm
5 in.
127 mm
6
5
NN
PP
MM