Filter
Top Products
5307884
Installation
The typical installation shown in Fig. 2 is only an installation guide; it is not an actual system design. Contact your
Graco distributor for assistance in designing a system to suit your needs.
Fig. 2
KEY
A Fluid dispense line
B Pump ground wire
C Air regulator
D Main air supply line
E Air filter
F Pump lubricator
G Pump runaway valve
H Meter
K Bleed-type master air valve
B
C
D
E
F
G
H
K
04044B
A
See Parts Drawing on page 10
Place an open 16-gallon (60-liter) steel drum (J) on
the base (3).
Secure the drum with the hold down clamps (3c)
and hex head bolts (3c).
Place the drum cover (4) on the drum, and fasten
it with the screws and washers provided. Carefully
guide the pump riser tube through the mounting
gasket. Refer to the assembled view of Model
225728 on the front cover.