Filter
Top Products
Digital Display
26 3A0246C
Digital Display
Removal
1. Turn off unit. Wait 5 minutes before servicing.
2. Remove four screws (33b) and remove display
cover (33k).
3. Unplug display board connector from motor control
board (24).
Installation
1. Plug display board connector (A) into motor control
board (24).
2. Replace display cover (33k) and torque four screws
(33b) to 30-35 in-lb.
NOTE: Make sure noise shield tabs are routed to the
inside of the control box when assembling.
33b
33k
ti15786a
A
24
ti13569a
A
24
ti13569a
33b
33k
ti15786a