Filter
Top Products
Setup
4 333428E
ti23592a
1
Read your sprayer, in-line valve, and CleanShot manuals.
Assemble JetRoller as shown. Snug extension fittings with wrenches.
Then tighten another 1/4 turn [~100 in-lb (11 N•m)]. Attach to gun
sprayer hose. Prime sprayer as directed in sprayer manual.
500
2000
2500
3000
0
500
2
00
0
2500
3
000
0
bar
MPa
1000
OK
PSI
68.9
6.89
103.4
10.3
1500
2
For best results use sprayer
pressure shown below. Al-
ways spray at the lowest
pressure necessary to get de-
sired results.
ti23598a
OK
Adjust CleanShot position so
spray fan hits below roller cover.
ti23643a
Quickly trigger once and release to check pattern. Pattern
should be as wide as roller.
NOTE: CleanShot knob may be adjusted to optimize spray fan.
To narrow pattern, loosen roller handle and
move roller cover toward CleanShot. To
widen pattern, loosen roller handle and
move roller cover away from CleanShot.
ti23640a
ti23647a
3
4