Filter
Top Products
2 310894
Table of Contents
W arnings 2......................................
Service 3.......................................
Technical Data 9.................................
Parts, Pump
287512 10.....................................
287513 11.....................................
249122 12.....................................
287579 13.....................................
287928 14.....................................
287929 15.....................................
289590 16.....................................
W arranty 18.....................................
Graco Phone Number 18..........................
Warnings
Warning Symbol
WARNING
This symbol alerts you to the possibility of serious
injury or death if you do not follow the instructions.
Caution Symbol
CAUTION
This symbol alerts you to the possibility of damage to
or des truction of equipm ent if you do not follow the
instructions.
WARNING
INSTRUCTIONS
EQUIPMENT MISUSE HAZARD
Misuse can cause death or s erious injury.
D Do not exceed the maximum working pressure temperature rating of t he lowest rated system
component. See Technical Data in all equipment manuals.
D Use fluids and solvents compatible with equipment wetted parts. See Technical Data in all equip-
ment manuals. Read manufacturer fluid and s olvent warnings.
D Check equipment daily. Repair or r eplace worn or dam aged parts immediately.
D Do not alter or m odify equipment.
D Read all instruction manuals, tags, and labels before operating the equipment.
D Use equipment only for its intended purpose. Call your Graco distributor for information.
D Do not us e 1,1,1--trichloroethane, methylene c hloride, other halogenated hydrocarbon solvents or
fluids containing such solvents in pressurized aluminum equipment. Such use c ould result in a
chemical reaction, with the possibility of explosion.
D Comply with all applicable safety regulations.
MOVING PARTS HAZARD
Moving parts can pinch or amputate your fingers.
D Keep clear of moving parts.
D Do not oper ate equipment with protective guards or covers removed.
D Pressurized equipment can start without warning. Before checking, m oving or servicing equipment,
follow the Pressure Relief Procedure on page 3. Disconnect power cord.