Filter
Top Products
Assembly
4 310864D
Assembly
1. Attach front wheels (A). Assemble wheel (A) on
axle, then washer and hex-head bolt. Tighten.
2. Attach rear casters (B). Insert caster shaft through
hole in bracket. Assemble washer, lock washer, and
crown nut. Tighten.
3. Insert handle (C) into brackets (D) on back of tank,
secure with screws provided.
4. Place tool tray (E) on tabs of tray bracket (F). Apply
pressure to seat tray.
5. Insert the drain tube (H) through threaded opening
on top of tank and hand-tighten collar (K) on
threads.
6. Connect drain bowl (G) to drain tube (H) and tighten
screw (J) to secure.
7. Loosen knob (L) and raise or lower drain bowl to
desired height. Hand-tighten knob (L) to secure
bowl at desired height
8. Place filter tray (M) into drain bowl (G).
9. Place plastic funnel extension (N) over drain bowl
(G).
Numbered panels in FIG. 1 correspond to the fol-
lowing steps. Part callout letters in F
IG. 1, i.e., (A)
are referenced throughout this manual.
F
IG. 1: Assembly
1, 2
C
D
E
F
B
A
5, 6, 7
3, 4
G
H
K
G
M
L
N
8, 9
O
R
S
P
J
T