Graco 1050C Water Pump User Manual


 
Installation
312877P 7
Installation
The Typical Installation shown in FIG. 4 is only
a guide for selecting and installing system
components. Contact your Graco distributor for
assistance in planning a system to suit your
needs.
Tighten Fasteners Before Setup
Before using the pump for the first time, check
and retorque all external fasteners. Follow
Torque Instructions, page 17.
PRESSURIZED ALUMINUM PARTS HAZARD
Use of fluids that are incompatible with aluminum in pressurized equipment can cause
serious chemical reaction and equipment rupture. Failure to follow this warning can
result in death, serious injury, or property damage.
Do not use 1,1,1-trichloroethane, methylene chloride, other halogenated
hydrocarbon solvents or fluids containing such solvents.
Many other fluids may contain chemicals that can react with aluminum. Contact
your material supplier for compatibility.
PLASTIC PARTS CLEANING SOLVENT HAZARD
Use only compatible water-based solvents to clean plastic structural or pressure-con-
taining parts. Many solvents can degrade plastic parts and cause them to fail, which
could cause serious injury or property damage. See Technical Data in this and all
other equipment instruction manuals. Read fluid and solvent manufacturer’s warnings.
TOXIC FLUID OR FUMES HAZARD
Toxic fluids or fumes can cause serious injury or death if splashed in the eyes or on
skin, inhaled, or swallowed.
Read MSDS’s to know the specific hazards of the fluids you are using.
Route exhaust away from work area. If diaphragm ruptures, fluid may be exhausted
with air.
Store hazardous fluid in approved containers, and dispose of it according to appli-
cable guidelines.
BURN HAZARD
Equipment surfaces and fluid that’s heated can become very hot during operation. To
avoid severe burns:
Do not touch hot fluid or equipment.
PERSONAL PROTECTIVE EQUIPMENT
You must wear appropriate protective equipment when operating, servicing, or when in
the operating area of the equipment to help protect you from serious injury, including
eye injury, inhalation of toxic fumes, burns, and hearing loss. This equipment includes
but is not limited to:
Clothing and respirator as recommended by the fluid and solvent manufacturer
Protective eyewear, gloves, and hearing protection
WARNING