Filter
Top Products
©2004 Gilson, Inc. 303066-02. Printed in the USA. Specications subject to change without notice. Gilson, Inc., Gilson S.A.S. and Gilson International B.V. are ISO 9001 certied.
Gilson, Inc. World Headquarters
Middleton, WI 53562 USA
Telephone: 800-445-7661 or 608-836-1551
Fax: 608-831-4451
sales@gilson.com, service@gilson.com, training@gilson.com
Gilson S.A.S.
19, avenue des Entrepreneurs
F-95400 VILLIERS LE BEL France
www.gilson.com
Technical Specifications
Front Panel
HOT, COLD and STANDBY indicator lights
Liquid-Contact Materials
Anodized cast aluminum (T6061 and T5052 H32), stainless steel (300 series), polypropylene
Manufacturing Standards
Meets applicable Safety and EMC certif ication standards; UL and CE certif ied
Power Requirements
Voltage: 5 and 24V DC
Current rating: 0.2A at 5V or 5.0A at 24V
Rack Capacity
852: Two Becton Dickinson Falcon™ assay plates, 96-well, shallow, “U-Bottom”
853: 96 f lat-bottom vials, 12 x 32 mm (2 mL)
854: Two Ritter or Beckman microplates, 96-well, deep
Software
Via Programmable Peltier Controller keypad or Gilson control software
Temperature Range
4–40°C
Dimensions* (w x d x h)
11.9 x 33.8 x 16.8 cm (4.7 x 13.3 x 6.6 in.)
*Up to ve 85X Series Peltier Racks will t on the locator plate of a single-probe 215 Liquid Handler.
Weight
852: 3.4 kg (7.6 lbs.)
853: 4.9 kg (10.7 lbs.)
854: 3.8 kg (8.4 lbs.)
Front Panel
POWER indicator light; 25 soft keys
Display Panel
40-character, four-line backlit LCD
Manufacturing Standards
Meets applicable Safety and EMC certif ication standards; UL and CE certif ied
Modes
Cooling (C): The current temperature of the rack is more than 2°C warmer than the set temperature
Heating (H): The current temperature of the rack is more than 2°C cooler than the set temperature
Initializing (I): The rack is initializing
Ready (R): The current temperature of the rack is ±2°C of the set temperature
Stopped (S): The temperature of the rack is no longer being regulated
Error (E): The rack is in an error state. Contact Gilson for assistance
Programming (P): The rack is in the programming state. Contact Gilson for assistance
Power Requirements
Frequency: 50–60 Hz
Voltage: 90–240V
Current rating: 8.0A for 90–120V or 4.0A for 220–240V (max.); 6.0A for 90–120V or 3.0A for 220–240V (typical)
Internal fuses: Five 5A subminiature PC board fuses to be replaced by service personnel only
Software
Via Gilson control software
Communication Interface
RS-232 or GSIOC
Dimensions (w x d x h)
26.5 x 43.5 x 15.6 cm (10.4 x 17.1 x 6.2 in.)
Weight
8.4 kg (18.6 lbs.)
Programmable Peltier Controller
852/853/854 Peltier Racks
For applications or additional information, contact your local Gilson Technical Sales Representative or visit www.gilson.com.