Gianni Industries IP67 Door User Manual


  Open as PDF
of 2
 
GIANNI INDUSTRIES, INC.
The products are manufactured under an ISO
9001 QC 080000 Certified Quality
Management Program environment back its
product quality, performance and commitment
tocustomersatisfaction.
&
Easiprox-ANSI Stand-Alone
Proximity Access Control System
The Tag Simulator is used to add and delete any card/tag
number from the reader memory when the tag is lost or not
available.
TS-980 simulator
Optional AccessoryEasy Programming
The product is warranted against defects in material and
workmanship while used in normal service for a period of 1
year from the date of sale to the original customer. The GEM
policy is one of continual development and improvement;
therefore GEM reserves the right to change specifications
without notice.
Warranty
Unit size : 120L x 54Wx38Hmm
Weight : 180 g
Operating distance : lessthan 60mm
Battery:PP3-9V
Operating distance
less than 6 cm
GREEN lamp to
start flashing
Read the Master Tag once
ADD state
1
RED lamp to
start flashing
Read the Master Tag twice
Delete Tags
2
YELLOW and RED
lamps to start flashing
Read the Master Tag three times
Clear Memory
3
Wait for the YELLOW
lamp to start flashing
Read the Master Tag four times
Time Adjust and Toggle Mode Selection
4
Copyright 2008Gianniindustries,inc.Allrightsreserved.
DM-CA-Easiprox-Split Ver.C Publishedon2008.05.15
No.13, Zhong SingRoad, Tu-Cheng IndustrialZone,
Tu-ChengCity, Taipei, Taiwan23678
Tel:886-2 2267 7986/ Fax: 886-22267 9876
E-Mail:info@gianni.com.tw
Website:gianni.tw
 previous