Filter
Top Products
1
2
3
4
5
Use 3 mm hexagon tool wrench
to operate the screw.
Use 4 mm hexagonal screw
to tighten the electromagnet
lock.
1. Take out the lock, connect the wires
(please see the picture on the right)
2. Once the power source is connected,
make a hole for the power wires.
Put in the lock, pull out the
power lines.
Screw in the hexagonal screw.
+
+
-
-
N.O.
COM.
N.C.
Power
Input
12Vdc
24Vdc
voltage setting
Power
Electric Control Circuit
(N.C. Contact)
Signal output contact.
Withstanding Power:
3A@12Vdc
FDH-100M / FDH-200M
Electromagnetic Lock
GIANNI INDUSTRIES, INC.
The products are manufactured under an ISO
9001 QC 080000 Certified Quality
Management Program environment back its
product quality, performance and commitment
tocustomersatisfaction.
&
Installation Manual
Wiring Diagram
50
37
Copyright 2008Gianniindustries,inc.Allrightsreserved.
DM-CA-FDH Ver.C Publishedon2008.05.19
No.13, Zhong SingRoad, Tu-Cheng IndustrialZone,
Tu-ChengCity, Taipei, Taiwan23678
Tel:886-2 2267 7986/ Fax: 886-22267 9876
E-Mail:info@gianni.com.tw
Website:gianni.tw