Gianni Industries EM-350 series Door User Manual


 
GIANNI INDUSTRIES, INC.
The products are manufactured under an ISO
9001 QC 080000 Certified Quality
Management Program environment back its
product quality, performance and commitment
tocustomersatisfaction.
&
Optional Brackets
The door swinging direction and the door frame header are
used to determine whether the bracket is required and this
identify is a measure of which brackets is suitable. Our
optional brackets include L bracket LZ bracket and U
bracket (Except 10002BZ )
-,- -
.
The product is warranted against defects in material and
workmanship while used in normal service for a period of 5
year from the date of sale to the original customer. The GEM
policy is one of continual development and improvement;
therefore GEM reserves the right to change specifications
without notice.
Warranty
With L-bracket for narrow door frames
Magnet
Armature
Door
Frame
Door
Leaf
48mm
A
Out-swinging
When <48mm,must
installed with "L" brackets.
"A"
L-350
With LZ-bracket for in-swinging doors
LZ-350
With U-bracket for frameless glass doors
UBK-010
UBK-012
For 10mm thickness of glass door
For 12mm thickness of glass door
L-350 and LZ-350 brackets can adjust the gap between the
Electromagnetic Lock and the Armature plate. The special
curve design enhanced the aesthetic appearance of EM-
350 on any door frame.
Magnet
Armature
(OnPower)
When the power is switched off, the holding force will be
discontinuity and the bolt was installed in armature will pop
Regular Installation
UniqueAnti-Residual design
EM-350 series
Midi Electromagnetic Lock
Copyright 2008Gianniindustries,inc.Allrightsreserved.
DM-CA-EM350 Ver.C Publishedon2008.04.28
No. 13, Zhong Sing Road, Tu-Cheng Industrial Zone,
Tu-Cheng City, Taipei, Taiwan 23678
Tel: 886-2 2267 7986 / Fax: 886-2 2267 9876
E-Mail: info@gianni.com.tw
Website:gianni.tw