Filter
Top Products
GEM's electric dropbolts can be installed either horizontally
at the top or bottom of the door frame or vertically on the side
of the door frame.
Use jumpers to adjust the time between 0 to 9 seconds for
door locking time delay. This is the time, which takes the
Dropbolt to automatically lockafter thedoor isclosed.
0 seconds
3 seconds 6 seconds 9 seconds
Auto Relocking TimerSetting
The door close sensor can work up to a range of 5mm. If
there is a wide door gap, a sensor magnet within the strike
plate of the doorcan beadjusted toimprove sensoraccuracy.
45
5mmmaxi
Reed
GIANNI INDUSTRIES, INC.
The products are manufactured under an ISO
9001 QC 080000 Certified Quality
Management Program environment back its
product quality, performance and commitment
tocustomersatisfaction.
&
The product is warranted against defects in material and
workmanship while used in normal service for a period of 1
year from the date of sale to the original customer. The GEM
policy is one of continual development and improvement;
therefore GEM reserves the right to change specifications
without notice.
Warranty
Horizontal or vertical installation Long life solenoids
Adjustable Sensor
Clamp Design
Auto Relocking Timer Setting
Special designed solenoid for strength and long life
operating lifetime with guaranteed500,000 operations.
When the bolt is extended to keep the door locked, it draws
only 0.3A in a holding mode down from 0.9A while the bolt is
retracted. This design both protects the power supply and
extends the life ofthe electricdropbolt.
Pull in
Holding
Current Draw (mA)
Time (seconds)
Wiring cable
Header
Door
Blind Nut
EB-400
EB-400 Surface Mount
stainless housing Electric Dropbolt
Copyright 2008Gianniindustries,inc.Allrightsreserved.
DM-CA-EB-400 Ver.E Publishedon2008.10.20
No.13, Zhong SingRoad, Tu-Cheng IndustrialZone,
Tu-ChengCity, Taipei, Taiwan23678
Tel:886-2 2267 7986/ Fax: 886-22267 9876
E-Mail:info@gianni.com.tw
Website:gianni.tw