Filter
Top Products
Auxiliary reader
The auxiliary reader must not be further than 50 meters from
the DG-600H. Also this reader should be nearer than 60
centimeters, to avoid disturbance. The suggested wire gauge
is #22~26 AWG. auxiliarySplit of units for DG-600H and
reader in ranging up to 50 M bring out the friendly system
device for low cost but high security with anti-tampering as
well as convenience and reliability.
GIANNI INDUSTRIES, INC.
No.306-1, Hsin Shu Road, Hsin Chuang, Taipei,Taiwan 242
TEL: 886-2-2206 9929 FAX: 886-2-2204 6632
E-Mail: info@gianni.com.tw
Website: gianni.tw
Copyright© 2008 Gianniindustries, inc.Allrightsreserved.
DM-CA-DG-600H Ver.D Publishedon 2008.05.06
The products are manufactured under an ISO
9001 QC 080000 Certified Quality
Management Program environment back its
product quality, performance and commitment
tocustomer satisfaction.
&
GP001
DG-600H
Stand-alone Proximity Reader
Connecting Diagram
Fail-Safe Lock
St 2connect to 1-2
Contact doorswitch orthe
electric lock signaloutput
Push Button
External relaystart
the warningsystem
Auxiliary Reader
(Wiegand Format)
Connect to 1-2;Cand Dcontact is N.C.
Connect to 2-3;for N.O.
Connect to 1-2;CandAcontact isN.C.
Connect to 2-3;for N.O.
Fail-Secure Lock
St 2connect to 2-3
*Linear supplyrecommended
Power supply
(9~16Vdc)
Insert 2-3position toreset
GEMPROX-H
125 KHz,Wiegand 26~37-bit
format output
Size:88(L) X 44(W)X16(D)mm
DG-600H Jp1leads toall Wiegandformat
DG-600H Jp1short-circuit toWiegand 26bits format