Gianni Industries DG-1000M Door User Manual


  Open as PDF
of 2
 
GIANNI INDUSTRIES, INC.
No.306-1, Hsin Shu Road, Hsin Chuang, Taipei,Taiwan 242
TEL: 886-2-2206 9929 FAX: 886-2-2204 6632
E-Mail: info@gianni.com.tw
Website: gianni.tw
Copyright ©2008 Gianniindustries, inc.All rightsreserved.
DM-CA-DG-1000M Ver.C Published on2008.05.05
The products are manufactured under an ISO
9001 QC 080000 Certified Quality
Management Program environment back its
product quality, performance and commitment
to customersatisfaction.
&
The product is warranted against defects in material and
workmanship while used in normal service for a period of 1
year from the date of sale to the original customer. The GEM
policy is one of continual development and improvement;
therefore GEM reserves the right to change specifications
without notice.
GP001
Warranty
USB Interface
DG-1000M
Stand alone Access Controller
A device driver has been provided, which when installed will
allow low-level communication between the host and the DG-
1000M device. This driver has been tested for Windows 2000
and Windows XP. A high level COM interface is also provided
which must be registered with Windows. This is a high-level
interface, and provides for easy access using application
software like Borland Delphi, Microsoft Visual Basic and any
others which support the Microsoft Windows COM technology.
Specifications
1000
12 (0,9,*,#)
13.56MHz
LED (
1~99 Seconds
5%~95%
Operating Voltage: DC 12V
Current Draw: 95~140mA @12VDC
2A MAX @30Vdc 0.4A @ 120Vac
Red/Yellow/Green)
-20°C~+70°C
；Relay Electric Current:
Memory Volume: Proximity cards
Keyboard: digits keypad
Transmitting Frequency:
Visual Signals:
Relocking timer:
Case Material: ABS UL94V0
Ambient Humidity:
Operating Temperature:
EPROM: Non-volatile memory, System will retain all
programs and codes after a total loss of power.
（）
 previous