Filter
Top Products
CONTROLS AND INSTRUMENTS
The following gauges are used to monitor the
machine:
1 - Fuel Level
2 - Water Temperature, Engine
3 - Oil Pressure, Engine
4 - Oil Temperature, Powershift Transmission
5 - Oil Pressure, Powershift Transmission
6 - Voltmeter
BRAKE
PARKING
PRESSURE
LOW BRAKE
OFF
PUMP
HEADLIGHTSWORKL IGHTS
WIPER
FRONT
WIPER
REAR
PUMP
OFF
LOW BRAKE
PRESSURE
HEADLIGHTS
REAR
WIPER
FRONT
WIPER
WORKLIGHTS
PARKING
BRAKE
GAUGES
1
2
34
5
6
HYDRAULIC PUMP DESTROKE BUTTON
Depressing the pump destroke button while operating the machine
will cause an immediate loss of hydraulic power, possibly
creating a very dangerous situation. Hydraulic functions that
will be affected are: FORK TILT, LIFT, BOOM EXTEND
and RETRACT, PARKING BRAKE and SWAY. None of these
functions will operate as long as the button is depressed. The
service brakes will continue to function if the accumulator backup
has a sufficient gas charge.
The pump destroke button (C) is the black push button
switch located on the dash panel.
For example, when starting the machine for the first time on a 30
degree F. day, depress the pump destroke button while starting
the engine. Continue to depress the button for 15 to 20 seconds
after the engine starts. Once the engine is running smoothly,
release the button and the hydraulic pump will engage.
Depressing the pump destroke button will not be required for
all other starts of the day, unless the engine has been allowed
to cool completely.
DANGER
C
3 - 9