Filter
Top Products
Operator's ManualThird Edition • Second Printing
Part No. 1000032 GS-1530 • GS-1532 • GS-1930 • GS-1932 23
OPERATING INSTRUCTIONS
To Drive
1 Press the drive function select button.
2 Press and hold the function enable switch on the
control handle.
3 Increase speed: Slowly move the control handle
off center.
Decrease speed: Slowly move the control
handle toward center.
Stop: Return the control handle to center or
release the function enable switch.
Use the color-coded direction arrows on the
platform controls and on the platform to identify the
direction the machine will travel.
Machine travel speed is restricted when the
platform is raised.
Battery condition will affect machine performance.
Machine drive speed and function speed will drop
when the battery level indicator is flashing.
Driving on a slope
Determine the slope and side slope ratings for the
machine and determine the slope grade.
Maximum slope rating, stowed:
GS-1530 and GS-1930 30% (17°)
GS-1930 and GS-1932 25% (14°)
Maximum side slope rating, stowed:
GS-1530 and GS-1930 30% (17°)
GS-1930 and GS-1932 25% (14°)
Note: Slope rating is subject to ground conditions
and adequate traction.
Press the drive speed button to the fast drive
speed mode.
To determine the slope grade:
Measure the slope with a digital inclinometer OR
use the following procedure.
You will need:
carpenter’s level
straight piece of wood, at least 1 m long
tape measure
Lay the piece of wood on the slope.
At the downhill end, lay the level on the top edge of
the piece of wood and lift the end until the piece of
wood is level.
While holding the piece of wood level, measure the
distance from the bottom of the piece of wood to
the ground.
Divide the tape measure distance (rise) by the
length of the piece of wood (run) and multiply by
100.
Example:
Run = 3.6 m
Rise = 0.3 m
0.3 m ÷ 3.6 m = 0.083 x 100 = 8.3%
rise
run