Filter
Top Products
Operator's Manual Third Edition • Second Printing
22 GS-1530 • GS-1532 • GS-1930 • GS-1932 Part No. 1000032
Operation From Platform
1 Turn the key switch to platform control.
2 Pull out the ground and platform red Emergency
Stop buttons to the on position.
3 Be sure the battery pack is connected before
operating the machine.
To Position Platform
1 Press the lift function select
button.
2 Press and hold the function
enable switch on the control
handle.
3 Move the control handle according to the
markings on the control panel.
To Steer
1 Press the drive function select
button.
2 Press and hold the function
enable switch on the control
handle.
3 Turn the steer wheels with the thumb rocker
switch located on the top of the control handle.
To reduce drive speed
The drive controls can operate in two different drive
speed modes. When the drive speed button light is
on, slow drive speed mode is active. When the
button light is off, fast drive speed mode is active.
Press the drive speed button to select
the desired drive speed.
OPERATING INSTRUCTIONS
Emergency Stop
Push in the red Emergency Stop button to the off
position at the ground controls or the platform
controls to stop all functions.
Repair any function that operates when either
Emergency Stop button is pushed in.
Auxiliary Lowering
1 Pull the auxiliary lowering knob.
Operation From Ground
1 Turn the key switch to ground control.
2 Pull out both ground and platform red
Emergency Stop buttons to the on position.
3 Be sure the battery pack is connected before
operating the machine.
To Position Platform
1 Move the up/down toggle switch according to
the markings on the control panel.
Drive and steer functions are not available from the
ground controls.