GE RAK164P1 Thermostat User Manual


 
Programming.
Program Overview
The programmable thermostat has four periods (MORN, DAY,
EVE, NITE) that are customizable for each day of the week.
Each period will have a set time, heat temperature and cool
temperature. The thermostat monitors the day and time, while
maintaining the specific conditions that you have chosen for
each period in your program.
Note: Operation being set will blink in the display.
1. Place the Function switch in the
Off position.
2. Press the Hold button in
for 6 seconds.
3. Press the Hold button 3 times.
DAY (01–07) and PROG is displayed.
4. Press the or button to change the day you want
to program (01 = Monday, 02 = Tuesday, etc.).
5. Press the Hold button to advance to the next parameter.
Note: You can always press the Mode button to return to the
previous parameter.
• Period is displayed (MORN, DAY,
EVE, NITE).
6. Press the or button to
change period of day. The display
should blink the period of the day.
7. Press the Hold button to advance to the next parameter.
• Set time is displayed.
8. Press the or button to
adjust hours. Press the Hold
button once, and then press the
or buttons to adjust minutes.
9. Press the Hold button to advance to the next screen
parameter. Note: Transitions required after 11:59 PM must
be programmed in the next day’s MORN period.
>
<
>
<
>
<
>
<
DAY
PROG
DAY
MORN
PROG
DAY
AM
PROG
MORN
15