GE PG Series Water Heater User Manual


 
Safety Instructions Installation Instructions Operating Instructions Care and Cleaning Troubleshooting Tips Customer Service
25
Draft hood
Temperature and
pressure relief valve
* Burner Access Door Gasket
Flue baffle and
hanger
Anode rod
Dip tube
Dip tube gasket
* Burner
* Burner Orifice
Gas Control (Thermostat)
Piezo Ignitor Striker
Mounting Bracket
Drain Valve
* Pilot Burner and
Piezo electrode
* Thermocouple
* Pilot Supply Tube
* Piezo Ignitor Wire
* Burner Access Door Grommet
Jacket Door
* Sight Glass
* Burner Access Door
* Burner Supply Tube
The kit provides extra speed clips
and tamper resistant screws.
**Not supplied with all models.
*Burner Assembly Kit
**Heat Trap
**Nipple
**Heat Trap
**Nipple
Replacement parts.
For 30, 40 and 50 gallon models using natural or LP gas.
Instructions For Placing a Parts Order
To place orders using a Visa/MasterCard
call 800-431-1549.
All parts orders should include:
The model and serial number of the
water heater from the rating plate.
Specify type of gas (natural or LP)
as marked on the rating plate.
Part description (as noted below)
and number of parts desired.
CAUTION: For your safety
DO NOT attempt repair of gas piping,
gas control (thermostat), burners, vent
connectors or other safety devices.
Refer repairs to qualified service
personnel.
!