Filter
Top Products
Consumer Support Troubleshooting Tips
Operating Instructions
Safety InstructionsInstallation Instructions
4
■ To ensure proper operation, aim the
remote control at the signal receiver
on the air conditioner.
■ The remote control signal has a range of up
to 21 feet.
■ Make sure nothing is between the air
conditioner and the remote control
that could block the signal.
■ Make sure batteries are fresh and installed
correctly–see the
Care and Cleaning
section.
About the controls on the air conditioner–models with touch pads.
Features and appearance will vary.
Controls
ON/OFF Pad
Turns air conditioner on and off.
Display
Shows the set temperature or time remaining
on timer.
MODE
Use to set the air conditioner to
COOL
or
FAN
mode.
Increase
▲
/Decrease
▼
Pads
Use to set temperature when in
COOL
mode.
FAN Pad
Use to set the fan speed to
LOW (F1), MED (F2)
or
HIGH (F3).
CIRCULAIRE
For continuous side-to-side air circulation
(cool settings only), set the Circulaire switch
to
ON
.
For fixed side-to-side air direction, set the
Circulaire switch to
ON
until the desired air
direction is obtained, then move it to
OFF
.
TIMER Pad
ON–
When the air conditioner is off, it can be
set to automatically come on in 1 to 12 hours
at its previous setting. Each touch will set the
timer in hours.
OFF–
When the air conditioner is on, it can be
set to automatically turn off in 1 to 12 hours.
Each touch will set the timer in hours. After
the timer has been on for 30 minutes, the
temperature will automatically rise 2°F, and
after another 30 minutes, it will automatically
rise 2°F again. The temperature will then stay
the same until the timer goes
OFF
.
To cancel the timer, press the
TIMER
pad
until the display time disappears.
Remote Control Signal Receiver
Remote Control
Air Conditioner Controls
Remote Control