GE ASR05 Air Conditioner User Manual


 
14
Consumer Support Troubleshooting Tips
Operating Instructions Safety InstructionsInstallation Instructions
Window Installation Instructions.
Install the Air Conditioner in the Window
Cut the window sash seal to the window
width and stick the adhesive side to the
bottom of the sash.
Place the air conditioner on the stool with
the bottom mounting rail against its back
edge. Center it and close the window
securely behind the top mounting rail.
It should be level or slightly tilted to the
outside. Use a level; about a 1/3 bubble
will be the correct case slant to the outside.
Extend the left and right accordion panels to
the vertical window sashes and attach with
4 type B screws. Attach the top mounting rail
to the sash with a type B screw.
Attach the brackets to the stool on both
sides using two type B screws.
C
B
A
Install the Security Bracket and the Foam Top Window Gasket
Attach a security bracket with a type B screw. Cut the foam top window gasket to the
window width.
Stuff the foam between the glass and the
window to prevent air and insects from getting
into the room.
The installation is now complete.
C
BA
5
4
Window sash seal
Type B
screws
Type B
screw
Type B screw
Type B
screws