GE ASH08 Air Conditioner User Manual


 
Window Installation Instructions
12
REMOVE THE FRONT GRILLE
(IF ATTACHED)
(cont.)
Pull the bottom grille
corners out to release
the lower tabs on
each side.
NOTE: Do not pull the
bottom edge toward
you more than 3 or
you may damage the tabs of the grille.
Lift the grille up and off the top tabs.
3
B
C
REMOVE THE AIR CONDITIONER
FROM THE CASE
Remove the 2 screws on each side of the
case. Keep these for later use.
Slide the air conditioner from the case by
gripping the base pan handle and pulling
forward while bracing the case.
Remove packing cardboard and tape,
if present.
4
A
B
Front of air conditioner
Front of air conditioner
PREPARE THE CASE
Remove the backing from the top mounting
rail seal strip and attach it to the bottom of
the top mounting rail.
Install the top mounting rail with 4 type A or
5 type A screws (as the installation requires)
from the outside of the case.
Insert the frames for the accordion panels
into the top and bottom mounting rails.
Attach the accordion panels to the side of
the case using 6 type A screws.
5
A
B
C
Top mounting rail
Bottom mounting rail