GE ASF05 Air Conditioner User Manual


 
INSTALL AIR CONDITIONER IN
WINDOW
Cut the window sash seal to the window
width and stick the adhesive side to the
bottom of the sash.
Place the air conditioner on the stool with
the bottom mounting rail against its back
edge. Center it and close the window
securely behind the top mounting rail.
It should be level or slightly tilted to the
outside. Use a level; about a 1/3 bubble
will be the correct case slant to the outside.
PREPARE AIR CONDITIONER
(CONT.)
Insert the frames of the accordion panels
into the top and bottom mounting rails.
Attach the accordion panels to the side
of the case using 6 type A screws.
3
D
Top mounting
rail
Accordion panels
Installation Instructions
4
A
Window
sash seal
B
INSTALL AIR CONDITIONER IN
WINDOW (CONT.)
Extend the left and right accordion
panels to the vertical window sashes and
attach with 4 type B screws. Attach the top
mounting rail to the sash with a type B
screw.
Attach the brackets to the stool on both
sides using two type B screws.
4
C
Type B
screws
Type B
screw
Type B screw
Type B
screws
INSTALL SECURITY BRACKET
AND FOAM TOP WINDOW
GASKET
Attach a security bracket with a type B
screw.
Cut the foam top window gasket to the
window width.
Stuff the foam between the glass and the
window to prevent air and insects from
getting into the room.
The installation is now complete.
5
A
B
C
13