Filter
Top Products
Window Installation Instructions for 12,000, 14,000, 16,000, 18,000, 22,000, and
24,000 BTU Units (models AS_12, AS_14, AS_16, AS_18, AS_22, and AS_24)
24
Customer Service Troubleshooting Tips
Operating Instructions
Safety InstructionsInstallation InstructionsCustomer Service Troubleshooting Tips Installation Instructions Safety Instructions
Operating Instructions
Customer Service Troubleshooting Tips Installation Instructions Safety Instructions
Operating Instructions
Install the Security Bracket and the Foam Top Window Gasket
Attach the security bracket with a type B screw. Cut the foam top window gasket to the
window width.
Stuff the foam between the glass and the
window to prevent air and insects from getting
into the room.
C
BA
8
9
Install the Case in the Window
Carefully slide the case into the window until
the bottom mounting rail drops into the
channels in the support assemblies. Center
the case and lower the window behind the top
mounting rail. The case should be
slightly tilted to the outside. Use a level;
about a 1/2 bubble will be the correct case
slant to the outside.
Attach the support assemblies to the bottom of
the case with type A screws, 3 on each side.
Extend the left and right accordion panels to
the vertical window sashes and attach the top
corners with 2 type B screws. Use an accordion
panel clamp on each lower corner to trap the
panels. Attach them to the stool using 2 type
B screws.
Secure the top mounting rail to the sash with
one type B screw.
D
C
B
A
Type B
screw
Type B
screw
Panel clamp and
type B screw
Panel clamp and
type B screw
Type B screw
Top mounting rail