Filter
Top Products
Customer Service
Troubleshooting Tips
Operating InstructionsSafety Instructions Installation Instructions
21
Storm Window Requirements
A storm window frame will not allow the air
conditioner to tilt towards the outside and will keep
it from draining properly. To adjust for this, attach
a piece of wood to the stool.
WOOD PIECES—
WIDTH:
2″
LENGTH:
Long enough to fit inside the window
frame.
THICKNESS:
To determine the thickness, place a
piece of wood on the stool to make it 1/2″ higher
than the top of the storm window frame.
Attach securely with nails or screws provided by
the installer.
2
3
Read completely, then follow step-by-step.
Window Requirements
■ These instructions are for a standard double-
hung window. You will need to modify them for
other types of windows.
■ The air conditioner can be installed without
the accordion panels if needed to fit in a narrow
window. See the window opening dimensions
at right.
■ All supporting parts must be secured to firm
wood, masonry or metal.
■ The electrical outlet must be within reach of the
power cord.
1/2″ higher
than frame
Storm window
frame
Wood
Stool
1
Remove the Front Grille, if attached
To remove the grille:
Remove shipping tape if present. Lift the
inlet grille (see the Care and Cleaning
section) and remove the screw behind it (if
present) that holds the grill in place.
A
Pull the grille
with your thumb
while pushing
the case with
your fingers.
B
NOTE: Do not pull the bottom edge toward you more
than 3 inches or you may damage the tabs of the grille.
17
3
⁄8″ min.
30″ to 41″
(With accordion panels)
26″ min.
(Without accordion panels)
Push the grille
to the left and
raise it up.
C