Filter
Top Products
Installation Instructions
21
REPLACE AIR CONDITIONER
IN CASE
Carefully slide the air conditioner back into
the case.
Attach the power cord to the base pan with
the clamp.
Reinstall the locking plate with the tab behind
the wall case flange. Tighten the screw.
Reattach the front grille. An opening for the
power cord is on the bottom of the front grille.
Fill holes and cracks with caulking provided by
the installer
.
INSTALL WINDOW GASKET AND
LOCKING BRACKET
Cut the foam top window gasket to the
window width.
Stuff the foam between the glass and the
window to prevent air and insects from
getting into the room.
Attach the window locking bracket with 1 type E
screw.
8
A
B
9
A
B
C
C
D
E
Clamp
Power cord
Base pan
Locking
plate
Tighten
screw