GE AJES 12 Air Conditioner User Manual


 
TOOLS YOU MAY NEED
13
GE KIT NUMBERS
Power cord may include a current interrupter
device. A test and reset button is provided on the
plug case. The device should be tested on a
periodic basis by first pressing the TEST button
and then the RESET button. If the TEST button
does not trip or if the RESET button will not stay
engaged, discontinue use of the air conditioner
and contact a qualified service technician.
Installation Instructions
USE GE
KIT NUMBER: FOR: DESCRIPTION:
RAK56A100 GE RAB13, 14 & 15 Fits all GE wall cases 26W x 18H x 24D
(ACLB & RCL Chassis)
RAK1072 Hotpoint ACXB10 & 11 Adapts an older Hotpoint wall case to a “J”
(ACTB Chassis) model chassis. Fits Hotpoint wall cases
25
3
4W x 16
7
8H x 18
5
8D
RAK1082 Whirlpool Type 23W Adapts Whirlpool wall case to a “J”
Wall Case model chassis. Fits Whirlpool wall
cases 25
7
8W x 16
1
2H x 23
1
8D
RAK1102 GE RAB30 Adapts GE wall case to a “J” model chassis.
(“F” models) Fits the RAB 30 wall case 26W x 18H x 24D
RAK123A64 Fedders Wall Case “A” Adapts Fedders wall case to a “J” model chassis.
Fits Fedders wall cases 27W x 16
3
4H x 16
3
4D
RAK126 Westinghouse Wall Case Adapts Westinghouse wall case to a “J”
(Type 2626D73H01) model chassis. Fits Westinghouse wall
cases 25
7
8
W x 15
7
16
H x 16D
RAB46, 47 & 48 Use these kits for all Standard wall case for “J” model chassis.
other brands not listed. RAG13 stamped aluminum exterior grille
included. Remove the existing case
and replace.
RAK690 RAB36, 37, 38, 46, 47 or 48 If you attach a custom architectural outdoor
(J-Chassis) grille, use this kit to ensure proper airflow.
RAG13 RAB36, 37, 38, 46, 47 or 48 Standard aluminum exterior grille (included with RAB46, 47, and 48 wall
(J-Chassis) cases)
RAG14E RAB36, 37, 38, 46, 47 or 48 Architectural louvered exterior grille
(J-Chassis)
Adjustable Wrench
Level
Phillips head
screwdriver
Hand or Saber Saw
Drill
Pencil
Ruler or Tape
Measure
Scissors or knife
Read these instructions completely and carefully.