GE AHG50 Dehumidifier User Manual


 
Customer ServiceTroubleshooting Tips
Operating InstructionsSafety Instructions
Care and Cleaning
5
About the controls on the dehumidifier.
Controls
Humidity Control
When you first use the dehumidifier, turn
the humidity control to
CONTINUOUS
, the
highest setting. At this setting, the unit will
operate continuously. Keep it at this setting
for three to four days.
When the excess moisture and dampness
odors are gone, adjust the control to a lower
setting. Use the dehumidifier as long as
excess moisture is present.
Fan Speed
(on some models)
The fan control adjusts the fan speed.
Set the fan control to
HIGH
for maximum
moisture removal. When the humidity has
been reduced and quiet operation is
preferred, set the fan control to
LOW.
Other Features
BUCKET FULL Light
Glows when the bucket is ready to be emptied.
Auto Shut Off
The Water Level Control Switch shuts off the dehumidifier when the bucket is full.
Auto Defrost
When frost builds up on the cooling coils, the compressor will cycle off until the
frost disappears. The fan continues to run.
D
R
Y
E
R
HUMIDITY
CONTROL
CONTINUOUSOFF
FAN
SPEED