Filter
Top Products
About the controls on the air conditioner—models with a control knob.
Features and appearance may vary.
Controls
ON/OFF Switch
Turns air conditioner on and off.
NOTE: If the air conditioner is off and is then turned
on while set in the COOL ON mode, it will take
approximately 3 minutes for the compressor to start
and cooling to begin.
FAN SPEED Switch
Use to set the fan speed to Low or Hi.
Mode/Temp Control
Use to set the air conditioner to the FAN ONLY
or the COOL ON mode.
FAN ONLY Mode
Use FAN ONLY at Hi or Low FAN SPEED to
provide air circulation and filtering without
cooling.
COOL ON Mode
Use COOL ON with Hi or Low FAN SPEED for
cooling. Turn the knob toward COOLER (larger
blue area) for the indoor air to become
cooler. Turn the knob toward the smaller blue
area for the indoor air to become warmer.
The Mode/Temp control is used to maintain
the room temperature. When set in the COOL
ON mode, the compressor will cycle on and off
to keep the room at the same level of comfort.
Cooling Descriptions
For Normal Cooling—Select the COOL ON mode
with the Mode/Temp knob set at the midpoint.
For Maximum Cooling—Select the COOL ON mode
with the Mode/Temp knob set toward COOLER
(larger blue area).
For Quieter & Nighttime Cooling—Select the COOL
ON mode with the Mode/Temp knob set toward
the smaller blue area.
NOTE: If you move the Mode/Temp control knob
from the COOL ON setting to the FAN ONLY setting,
wait at least 3 minutes before switching back to a
COOL ON setting.
Consumer Support
Troubleshooting Tips
Operating Instructions Safety InstructionsInstallation Instructions
6
POWER
FAN SPEED
COOL
ON
FAN ONLY
Low Hi
Off On