Filter
Top Products
11
Installation Instructions
WINDOW REQUIREMENTS
• These instructions are for a standard
double-hung window. You will need to
modify them for other types of windows.
• The air conditioner can be installed
without the accordion panels if needed
to fit in a narrow window. See the
window opening dimensions.
• All supporting parts must be secured to
firm wood, masonry or metal.
• The electrical outlet must be within
reach of the power cord.
1
13″ min.
22″ to 36″
(With accordion panels)
19″ min.
(Without accordion panels)
STORM WINDOW REQUIREMENTS
A storm window frame will not allow the
air conditioner to tilt toward the outside,
and will keep it from draining properly.
To adjust for this, attach a piece of wood
to the stool.
WOOD PIECES—
WIDTH: 2″
LENGTH: Long enough to fit inside the
window frame.
THICKNESS: To determine the thickness,
place a piece of wood on the stool to
make it 1/2″ higher than the top of the
storm window frame.
Attach securely with nails or screws
provided by the installer.
2
1/2″ higher
than frame
Storm
window
frame
Wood
Stool
PREPARE THE WINDOW
Cut the window sash seal to the window
width and stick the adhesive side to the
bottom of the sash.
Mark the centerline of the sill. Measure
and mark the locations for the support
brackets 8″ from both sides of the
centerline.
Place 2 support brackets on the sill,
against the back edge of the stool with
their holes centered on each 8″ mark.
Attach them to the sill with one Type B
screw through each support bracket.
D
C
B
A
3
Window
sash seal
INSIDE
Stool
Outside
Inside
Support
bracket
Sill
Type B screw
Support
bracket