Filter
Top Products
Installation Instructions
WINDOW REQUIREMENTS
• These instructions are for a standard
double-hung window. You will need to
modify them for other types of windows.
• The air conditioner can be installed
without the accordion panels if needed
to fit in a narrow window. See the
window opening dimensions.
• All supporting parts must be secured
to firm wood, masonry or metal.
• The electrical outlet must be within
reach of the power cord.
• Follow the dimensions in the table and
illustration for your model.
Models A B C
AET05, AEW05 13 1/4″ min. 22″–38″ 18 1/4″ min.
AEW06, AEW08 14 1/2″ min. 23″–38″ 19″ min.
1
A
(With accordion panels)
(Without accordion panels)
STORM WINDOW REQUIREMENTS
A storm window frame will not allow the
air conditioner to tilt toward the outside,
and will keep it from draining properly.
To adjust for this, attach a piece of wood
to the stool.
WOOD PIECES–
WIDTH: 2″
LENGTH: Long enough to fit inside the
window frame.
THICKNESS: To determine the thickness,
place a piece of wood on the stool to
make it 1/2″ higher than the top of the
storm window frame.
Attach securely with nails or screws
provided by the installer.
1/2″ higher
than frame
Storm
window
frame
Wood
Stool
2
10
PREPARE THE AIR CONDITIONER
Install the top mounting rail with 2 Type B
screws from the outside of the case.
Slide the left and right accordion panels
into the top and bottom mounting rails.
3
A
B
Top mounting rail
Bottom mounting rail
Top left
Top right
B
C