GE ABN10 Air Conditioner User Manual


 
The energy saver switch controls the fan.
ENERGY SAVINGS
—the fan and compressor cycle
on and off together. This
results in wider varia-
tions of room temperature and humidity.
Normally used when the room is unoccupied.
NORMAL
—the fan runs all the time, while the
compressor cycles on and off. This switch must
be set at
NORMAL
in order to use the fan setting
(on the mode control).
HIGH COOL, MED COOL
and
LOW COOL
provide
cooling with different fan speeds.
FAN ONLY
provides air circulation and filtering
without cooling.
NOTE:
If you move the switch from a cool setting to
OFF or to a fan setting, wait at least 3 minutes
before switching back to a cool setting.
The temp control is used to maintain the
room temperature. The compressor will cycle
on and off to keep the room at the same level
of comfort. The higher the number selected,
the cooler the indoor air will become.
The blower runs as long as the mode control is
not on
OFF
.
Operating Instructions
The
controls
on your
air
conditioner
21
1 2
Mode Control Temp Control
4
MODE CONTROLS TEMP CONTROLS
1
2
3
4
5
6
0
2
3
4
5
6
7
8
1
OFF
MED
COOL
HIGH
COOL
FAN
ONLY
LOW
COOL
OFF
MED
COOL
FAN
ONLY
LOW
COOL
HIGH
COOL
NORMAL
ENERGY
SAVINGS
MED
COOL
HIGH
COOL
LOW
COOL
Your model will look like one of these. (Some models do not have a “0” setting.)